A lot of Fourways housing is in security estates and relatively recent builds, and that changes how DStv installation in Fourways is best approached. On a new house, the cleanest result comes from planning conduit and the dish position before the walls are closed. In an established estate, the work has to fit rules about what may be seen from the street. OnspotElec is an authorised DStv installer serving Fourways and the surrounding area as a mobile service.
New buildsPlanning DStv Before the Builders Finish
If you are building or renovating, it is far easier to plan TV points now than to chase cables through finished walls later. A short conversation at the planning stage covers where the dish will go, how many rooms need signal and where the conduit should run.
Choose the dish position
The dish needs a clear view of the north-eastern sky. Think about what may be built on the next stand, because a neighbour's double storey can block a dish mounted low.
Decide on the TV points
List every room where you may want DStv, including a patio, study or spare bedroom. Laying an extra conduit now is far less disruptive than adding one later.
Lay suitable conduit
Conduit should be wide enough for coaxial cable, with gentle bends and draw wires in place. Narrow pipes and sharp corners make it hard to pull cable through without damaging it.
Install once the roof is finished
The dish, cabling and decoders go in near the end of the build, and the signal is tested at every point.
Our article on DStv for newly built properties goes through this in more depth, and the new installation service page explains what a full install covers.
Working Within Estate and HOA Rules
Security estates commonly have architectural guidelines that cover dish size, colour, height and position. Some want dishes kept out of sight from the road; others require approval before anything is fixed to an outside wall. Before booking:
- Get written approval. Ask the HOA or estate management what they require, and get the dish position approved.
- Arrange access. Many estates need contractor access arranged in advance, so let security know a technician is coming.
- Check for a communal system. Some estates and complexes have a shared dish. If yours does, the job is a connection to that system, handled through our estate and complex installation service.
- Tenants need landlord consent. If you rent, you need the owner's permission as well as the HOA's.
Older Properties Around Fourways
Not everything here is new. Broadacres, Magaliessig and Witkoppen include homes and complexes that have had the same dish for years, and these need the usual checks for weathered LNBs, perished cable and dishes that have drifted off target.
Lonehill
Lonehill is one of the more established parts of the area, with freestanding homes, cluster complexes and mature gardens. Two things are worth checking on older setups here: trees that have grown into the dish's view, and renovations that mean the dish has to come down for a while. If you are re-roofing or adding a room, a dish removal and reinstallation keeps the signal working once the builders leave, and cables can be replaced or re-routed at the same time.
Problems Seen on New and Newer Homes
- Blocked view after nearby construction. A dish that worked when your house was finished can lose signal once the stand next door is built on.
- Cable damaged in conduit. Cable pulled in early can be nicked by later building work or kinked at a tight bend.
- Too few TV points. A room added later often ends up with surface cabling. A second or third decoder can be linked with XtraView if the cabling allows it.
Moved into a new Fourways home and the DStv points do nothing? Call 083 489 1322 and tell us what was installed during the build.
Booking and Quotes for Fourways
We are open 24 hours, seven days a week, and emergency DStv assistance is available. For new builds, the earlier you make contact, the easier the planning. Pricing depends on the number of TV points, the cable runs and the equipment, so the quote is based on your actual job. Call or submit a quote request. Visit scheduling depends on your location, the work involved and technician availability.
Before any install, the checklist for preparing your property is a useful read. We also work in Sandton, Midrand and Randburg.
Fourways Installation FAQs
Yes, provided the estate has approved the dish position or confirmed how to connect to its shared system. We work within the estate's access process, so arrange contractor access before the visit.
Ideally before plastering, while conduit can still be laid to each room. The installation itself happens once the roof is complete and the house is close to finished.
Yes, as well as Lonehill, Broadacres, Magaliessig and Witkoppen. We do not have an office in Fourways; the service travels to you.
Sometimes. The dish must still see the north-eastern sky, so the options depend on the house and its surroundings. The technician can look at possible positions and you can then check them with the HOA.
